Quality stainless steel joints are inseparable from real materials for real materials. Usually they are made of 304 stainless steel. The inspection of factory inspection is strict, so that there are many types of stainless steel joints, and the parameters are different. Introduce their common parameters.

Connected φ20 stainless steel metal hose DPJ-end stainless steel connector DN20-G3/4, wall thickness 4mm, supporting stainless steel hexagonal lock mother, stainless steel hose guard, full set of stainless steel is the primary choice for motor manufacturers and transformer manufacturers.

DN16-G1/2 "stainless steel connector, stainless steel active connector, one end connects a stainless steel metal hose with a diameter of 16mm, and the connecting pier, wiring box, voltage device; DN25-M32 with a lock-ups connecting an open hole or G thread. *1.5DPN Inner teeth stainless steel composite connector, one end connects to a capacity of a plastic metal hose with a diameter of 25mm, and the internal threaded thread connects stainless steel pipes or galvanized steel pipes. One end of the mouth is connected to the stainless steel tube ripples, and one end with three screws and stainless steel steel pipes with threadless eyes: DN38 (40) -g1-1/2 "DGJ stainless steel stainless steel spring self-fixed joint, which is also used to connect the steel pipe and the steel pipe and the steel pipe and In the hose, it is better than the stainless steel card cover connector. The sealing of the deck self-solid connector is better. The stainless steel steel pipe is locked by the scallion. Stainless steel tubes with 60mm outer diameter and outer diameter.